| Component | Attributes | Description |
|---|---|---|
| Kemet C315C104M5U5TA | CAPACITOR, 100NF, 50V, Z5U, 2.5MMP Thru Hole | |
| Vishay TLDR4900 | Red Through-hole LED | |
| Vishay BFC237021104 | Capacitor, 0.10 uF 10% polyester | |
| Vishay TLHG4900 | Green Through-hole LED | |
| Murata GRM188R70J104KA01D | Capacitor, 100 nF 10% 6.3 V | |
| DLED SMD3528 | Generic LED | |
| Dialight 551-0407F | Red LED, 3mm | |
| TDK ATB322524-0110 | Transformers Audio & Signal Photoflash Capacitor Charging Transformer | |
| Vishay TLHG4900 | Green Through-hole LED | |
| Murata GRM21BR71H104KA01L | Capacitor, 0.1 uF 0805 50 V | |
| BI Technologies P160KN2-0EC15B1MEG | Potentiometer, rotary, 1M ohm | |
| Nichicon UVR1H100MDD | Capacitor, 10 uF 20% electrolytic | |
| Xicon 140-XRL10V100 | Cap Elect Alum 10V 100uF 20%leaded | |
| 224 | Ceramic Capacitors | |
| 16V 1000uF | Cap 16V 1000uF | |
| Xicon 140-XRL25V22-RC-TB | Cap Elect Alum 25V 22uF 20%leaded | |
| Chengx (DIP Micro) DE1494 | Cap Elect Alum 16V 100uF | |
| Murata GRM216R71H103KA01D | Capacitor, 10 nF 10% ceramic 0805 | |
| Nichicon UVR1E470MDD | Capacitor, 47 uF 20% electrolytic | |
| Texas Instruments TPS65820 | The TPS65820 provides an easy to use, fully integrated solution for handheld devices, integrating charge management, multiple regulated power supplies, system management and display functions, in a small thermally-enhanced 7-mm × 7-mm package. The high level of integration enables typical board area space savings of 70% when compared to equivalent discrete solutions, while implementing a high-performance and flexible solution, portable across multiple platforms. If required, an external host may control the TPS65820 via I2C interface, with access to all integrated systems. The I2C enables setting output voltages, current thresholds, and operation modes. Internal registers have a complete set of status information, enabling easy diagnostics, and host-controlled handling of fault conditions. The TPS65820 can operate in stand-alone mode, with no external host control, if the internal power-up defaults are compatible with the system requirements |