Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
TODO: Lipo charger/boost converter Do I need a linear regulator for 3.3V, or can I use VBATT? Inductor: http://www.digikey.com/product-detail/en/SRN3015-4R7M/SRN3015-4R7MCT-ND/2756147 ATMega 328P (cause it's easy) Gyro Accelerometer (SPI.) Nor gate to prevent bus traffic errors, if I'm using the same MCU pins for pixels WS2811 outputs: 4 wire, return signal to board Flat wire - http://www.digikey.com/product-detail/en/PSR1635-04/AF04-5-ND/213525 ICSP header Clock source THINGS TO CHECK: LIPO connector rotation
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (47)
Qty
Description
Resistor

R7

1
Generic Resistor (2M)
Push Button

SW5, SW1

2
Generic Push Button
TXB0108PWR

U78

1
IC, TRANSLATOR, 8BIT, BIDIRECTIONAL
Resistor

R6

1
Generic Resistor (2M)

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components