Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
This board connects to an 8-bit 5V bus and converts the digital bus value to seven segment hexadecimal display in software on the microcontroller. On my Arduino, the software is // The lookup table converts the four-bit input to the seven segment display. The MSB is segment a and the LSB is segment f. char lookup_table[16] = {0x7E, 0x30, 0x6D, 0x79, 0x33, 0x5B, 0x5F, 0x70, 0x7F, 0x7B, 0x77, 0x1F, 0x0D, 0x3D, 0x4F, 0x47}; void setup() { DDRB = B00000000; // 8 bit input (digit 1 high nybble, digit 2 low nybble) PORTB = B11111111; // With pull up resistors DDRD = B11111111; // Outputs for digit 1 (a-f MSB to LSB) and segment a digit 2 (LSB) DDRC = B00111111; // Remaining 6 segments of digit 2 (b-f) } void loop() { int digit1_in = (PINB & 0xF0) >> 4; int digit2_in = (PINB & 0x0F); int digit2_segments = lookup_table[digit2_in]; PORTD = (lookup_table[digit1_in] << 1 & 0xFE) + ((digit2_segments & 0x7F) >> 6); PORTC = digit2_segments & 0x3F; }
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (8)
Qty
Description
Resistor

R14, R9, R1, R6, R3, R15, R13, R5, R8, R10, R2, R4, R12, R11, R7

15
Generic Resistor (330)
Capacitor

C2

1
Generic Capacitor (1µF)
AVR ISP Surface Mount

J2

1
No description
Capacitor

C1

1
Generic Capacitor (1µF)

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components