Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
The functional purpose of this design is to charge a battery from the USB connector and provide power to a load connected to VCC_SYS. Status is indicated by the LEDs. The battery is a standard LiPo with max voltage = 4.2V. A limit of roughly 1.3A is imposed on the current drawn from the USB connector. There are 3 errors in this design (in the schematic and/or layout) that will result in the board not working as specified above. Fork this design, find the errors, and fix them!
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (10)
Qty
Description
Resistor

R10, R9, R6, R8

4
Generic Resistor (1K13)
ZX62-B-5PA(11)

J1

1
USB Micro B, SMT
Capacitor

C1

1
Generic Capacitor (1uF)
Capacitor

C5

1
Generic Capacitor (4.7uF)

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components