Lab Report Automation
Open in Editor
We didn't find the known forks.
Make the first fork
The project owner hasn't added any tags yet.
Published: October 11, 2016
Main Project Image
The project owner hasn't added main project image yet.
The project owner hasn't added a project description yet.
The project owner hasn't added any images yet.
<iframe width='800' height='600' frameborder='0' scrolling='no' src='http://upverter.com/eda/embed/#designId=81ea7bdab626a394'></iframe>
LeftDoorSensor, RightDoorSensor, C3
Generic Capacitor (Non-Polarized) (10uF)
Generic Push Button Switch
Peak-Peak Signal Buzzer Single Tone 2.9kHz Piezo (with Feedback) 3 ~ 30V 95dB @ 5V, 10cm
Export Design Data
Open JSON Format
All model data in Upverter's Open JSON export format (
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (
NC Drill (Excellon)
NC drill and route machine instructions (
X-Y, rotation and side data for Pick and Place assembly (CSV)
Schematic in image form
Schematic in SVG form
Schematic in PDF form
Export the board outline, part designators, and locations
CSV-formatted list of all issues associated with this design
PADS Layout Netlist
Export your schematic into a third-party layout tool
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components
CSV-formatted list of all nets
Bill of Materials
Identical parts grouped
Bill of Materials (split)
Identical parts separated
CSV-formatted drill chart