Particle Photon Garage Door Opener
Open in Editor
We didn't find the known forks.
Make the first fork
The project owner hasn't added any tags yet.
Published: September 16, 2015
Main Project Image
The project owner hasn't added main project image yet.
The project owner hasn't added a project description yet.
The project owner hasn't added any images yet.
<iframe width='800' height='600' frameborder='0' scrolling='no' src='http://upverter.com/eda/embed/#designId=14f52f7b35c7de8f'></iframe>
Small signal diode
Sip Relay 0.2 Spacing Form 1A with diode 5V coil
8 POS Header
NPN Amplifier Transistor
Particle's Internet of Things hardware development kit, the Photon, provides everything you need to build a connected product. Particle combines a powerful ARM Cortex M3 micro-controller with a Broadcom Wi-Fi chip in a tiny thumbnail-sized module called the PØ (P-zero).
Generic Resistor (5k)
Export Design Data
Open JSON Format
All model data in Upverter's Open JSON export format (
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (
NC Drill (Excellon)
NC drill and route machine instructions (
X-Y, rotation and side data for Pick and Place assembly (CSV)
Schematic in image form
Schematic in SVG form
Schematic in PDF form
Export the board outline, part designators, and locations
CSV-formatted list of all issues associated with this design
PADS Layout Netlist
Export your schematic into a third-party layout tool
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components
CSV-formatted list of all nets
Bill of Materials
Identical parts grouped
Bill of Materials (split)
Identical parts separated
CSV-formatted drill chart