Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
Release Notes for PICkit(R) 2 Microcontroller Programmer PICkit 2 V2.61.00 Device File V1.61.00 *** Important *** PICkit 2 software v2.61.00 requires PICkit 2 OS firmware *** Version 2.32.00 before the application will work correctly. *** Use the "Download PICkit 2 Firmware" selection on the *** Tools dropdown menu. The new OS is normally located at *** C:\Program Files\Microchip\PICkit 2 v2\PK2V023200.hex 24 March 2009 ----------------------------------------------------------------- Table of Contents ----------------------------------------------------------------- 1. Device Support List 2. Operating System Support List 3. Release notes ----------------------------------------------------------------- 1. Device Support List ----------------------------------------------------------------- ================================================================= = NOTE: This list shows support for the PICkit 2 Programmer = = software application. It does not show support for using the = = PICkit 2 within MPLAB IDE. For a list of MPLAB supported = = parts, see the MPLAB IDE PICkit 2 Readme. = = (Typically in C:\Program Files\Microchip\MPLAB IDE\Readmes) = ================================================================= * Indicates new parts supported in this release with v1.61 of the device file. + Indicates parts that require 4.75V minimum VDD for programming. PICkit 2 may not be able to generate sufficiently high VDD, so an external 5.0v power supply may be required. # indicates Midrange parts that support low Vdd programming Baseline Devices ---------------- PIC10F200 PIC10F202 PIC10F204 PIC10F206 PIC10F220 PIC10F222 PIC12F508 PIC12F509 PIC12F510 PIC12F519 PIC16F505 PIC16F506 PIC16F526 PIC16F54 PIC16F57 PIC16F59 Midrange/Standard Devices ---------------- >> All 'LF' versions of devices are supported PIC12F609 PIC12HV609 PIC12F615 PIC12HV615 PIC12F629 PIC12F635# PIC12F675 PIC12F683# PIC16F610 PIC16HV610 PIC16F616 PIC16HV616 PIC16F627 PIC16F628 PIC16F639 PIC16F627A PIC16F628A PIC16F648A PIC16F630 PIC16F631 PIC16F636# PIC16F676 PIC16F677 PIC16F684# PIC16F685# PIC16F687# PIC16F688# PIC16F689# PIC16F690# PIC16F72+ PIC16F73+ PIC16F74+ PIC16F76+ PIC16F77+ PIC16F716 PIC16F737+ PIC16F747+ PIC16F767+ PIC16F777+ PIC16F785 PIC16HV785 PIC16F84A PIC16F87# PIC16F88# PIC16F818# PIC16F819# PIC16F870 PIC16F871 PIC16F872 PIC16F873 PIC16F874 PIC16F876 PIC16F877 PIC16F873A PIC16F874A PIC16F876A PIC16F877A PIC16F882# PIC16F883# PIC16F884# PIC16F886# PIC16F887# PIC16F913# PIC16F914# PIC16F916# PIC16F917# PIC16F946# Midrange/1.8V Min Devices ---------------- PIC16F722 PIC16LF722 PIC16F723 PIC16LF723 PIC16F724 PIC16LF724 PIC16F726 PIC16LF726 PIC16F727 PIC16LF727 PIC16F1933 PIC16F1934 PIC16F1936 PIC16F1937 PIC16F1938 PIC16F1939 PIC16LF1933 PIC16LF1934 PIC16LF1936 PIC16LF1937 PIC16LF1938 PIC16LF1939 PIC18F Devices -------------- >> All 'LF' versions of devices are supported PIC18F242 PIC18F252 PIC18F442 PIC18F452 PIC18F248 PIC18F258 PIC18F448 PIC18F458 PIC18F1220 PIC18F1320 PIC18F2220 PIC18F1230 PIC18F1330 PIC18F1330-ICD PIC18F2221 PIC18F2320 PIC18F2321 PIC18F2331 PIC18F2410 PIC18F2420 PIC18F2423 PIC18F2431 PIC18F2450 PIC18F2455 PIC18F2458 PIC18F2480 PIC18F2510 PIC18F2515 PIC18F2520 PIC18F2523 PIC18F2525 PIC18F2550 PIC18F2553 PIC18F2580 PIC18F2585 PIC18F2610 PIC18F2620 PIC18F2680 PIC18F2682 PIC18F2685 PIC18F4220 PIC18F4221 PIC18F4320 PIC18F4321 PIC18F4331 PIC18F4410 PIC18F4420 PIC18F4423 PIC18F4431 PIC18F4450 PIC18F4455 PIC18F4458 PIC18F4480 PIC18F4510 PIC18F4515 PIC18F4520 PIC18F4523 PIC18F4525 PIC18F4550 PIC18F4553 PIC18F4580 PIC18F4585 PIC18F4610 PIC18F4620 PIC18F4680 PIC18F4682 PIC18F4685 PIC18F6310 PIC18F6390 PIC18F6393 PIC18F6410 PIC18F6490 PIC18F6493 PIC18F6520 PIC18F6525 PIC18F6527 PIC18F6585 PIC18F6620 PIC18F6621 PIC18F6622 PIC18F6627 PIC18F6628 PIC18F6680 PIC18F6720 PIC18F6722 PIC18F6723 PIC18F8310 PIC18F8390 PIC18F8393 PIC18F8410 PIC18F8490 PIC18F8493 PIC18F8520 PIC18F8525 PIC18F8527 PIC18F8585 PIC18F8620 PIC18F8621 PIC18F8622 PIC18F8627 PIC18F8628 PIC18F8680 PIC18F8720 PIC18F8722 PIC18F8723 PIC18F_J_ Devices ----------------- PIC18F24J10 PIC18LF24J10 PIC18F24J11 PIC18LF24J11 PIC18F24J50 PIC18LF24J50 PIC18F25J10 PIC18LF25J10 PIC18F25J11 PIC18LF25J11 PIC18F25J50 PIC18LF25J50 PIC18F26J11 PIC18LF26J11 PIC18F26J50 PIC18LF26J50 PIC18F44J10 PIC18LF44J10 PIC18F44J11 PIC18LF44J11 PIC18F44J50 PIC18LF44J50 PIC18F45J10 PIC18LF45J10 PIC18F45J11 PIC18LF45J11 PIC18F45J50 PIC18LF45J50 PIC18F46J11 PIC18LF46J11 PIC18F46J50 PIC18LF46J50 PIC18F63J11 PIC18F63J90 PIC18F64J11 PIC18F64J90 PIC18F65J10 PIC18F65J11 PIC18F65J15 PIC18F65J50 PIC18F65J90 PIC18F66J10 PIC18F66J11 PIC18F66J15 PIC18F66J16 PIC18F66J50 PIC18F66J55 PIC18F66J60 PIC18F66J65 PIC18F66J90 PIC18F67J10 PIC18F67J11 PIC18F67J50 PIC18F67J60 PIC18F67J90 PIC18F83J11 PIC18F83J90 PIC18F84J11 PIC18F84J90 PIC18F85J10 PIC18F85J11 PIC18F85J15 PIC18F85J50 PIC18F85J90 PIC18F86J10 PIC18F86J11 PIC18F86J15 PIC18F86J16 PIC18F86J50 PIC18F86J55 PIC18F86J60 PIC18F86J65 PIC18F86J90 PIC18F87J10 PIC18F87J11 PIC18F87J50 PIC18F87J60 PIC18F87J90 PIC18F96J60 PIC18F96J65 PIC18F97J60 PIC18F_K_ Devices ----------------- PIC18F13K22 PIC18LF13K22 PIC18F14K22 PIC18LF14K22 PIC18F13K50 PIC18LF13K50 PIC18F14K50 PIC18LF14K50 PIC18F14K50-ICD PIC18F23K20 PIC18F24K20 PIC18F25K20 PIC18F26K20 PIC18F43K20 PIC18F44K20 PIC18F45K20 PIC18F46K20 PIC24 Devices ------------- PIC24F04KA200 PIC24F04KA201 PIC24F08KA101 PIC24F08KA102 PIC24F16KA101 PIC24F16KA102 NOTE: To program PIC24F-KA- devices with MCLR used as IO, Tools > Use High Voltage Program Entry must be enabled. PIC24FJ16GA002 PIC24FJ16GA004 PIC24FJ32GA002 PIC24FJ32GA004 PIC24FJ32GA102 PIC24FJ32GA104 PIC24FJ48GA002 PIC24FJ48GA004 PIC24FJ64GA002 PIC24FJ64GA004 PIC24FJ64GA102 PIC24FJ64GA104 PIC24FJ64GA006 PIC24FJ64GA008 PIC24FJ64GA010 PIC24FJ96GA006 PIC24FJ96GA008 PIC24FJ96GA010 PIC24FJ128GA006 PIC24FJ128GA008 PIC24FJ128GA010 PIC24FJ128GA106 PIC24FJ128GA108 PIC24FJ128GA110 PIC24FJ192GA106 PIC24FJ192GA108 PIC24FJ192GA110 PIC24FJ256GA106 PIC24FJ256GA108 PIC24FJ256GA110 PIC24FJ32GB002 PIC24FJ32GB004 PIC24FJ64GB002 PIC24FJ64GB004 PIC24FJ64GB106 PIC24FJ64GB108 PIC24FJ64GB110 PIC24FJ128GB106 PIC24FJ128GB108 PIC24FJ128GB110 PIC24FJ192GB106 PIC24FJ192GB108 PIC24FJ192GB110 PIC24FJ256GB106 PIC24FJ256GB108 PIC24FJ256GB110 PIC24HJ12GP201 PIC24HJ12GP202 PIC24HJ16GP304 PIC24HJ32GP202 PIC24HJ32GP204 PIC24HJ32GP302 PIC24HJ32GP304 PIC24HJ64GP202 PIC24HJ64GP204 PIC24HJ64GP206 PIC24HJ64GP210 PIC24HJ64GP502 PIC24HJ64GP504 PIC24HJ64GP506 PIC24HJ64GP510 PIC24HJ128GP202 PIC24HJ128GP204 PIC24HJ128GP206 PIC24HJ128GP210 PIC24HJ128GP306 PIC24HJ128GP310 PIC24HJ128GP502 PIC24HJ128GP504 PIC24HJ128GP506 PIC24HJ128GP510 PIC24HJ256GP206 PIC24HJ256GP210 PIC24HJ256GP610 dsPIC33 Devices --------------- dsPIC33FJ06GS101 dsPIC33FJ06GS102 dsPIC33FJ06GS202 dsPIC33FJ16GS402 dsPIC33FJ16GS404 dsPIC33FJ16GS502 dsPIC33FJ16GS504 dsPIC33FJ12GP201 dsPIC33FJ12GP202 dsPIC33FJ16GP304 dsPIC33FJ32GP202 dsPIC33FJ32GP204 dsPIC33FJ32GP302 dsPIC33FJ32GP304 dsPIC33FJ64GP202 dsPIC33FJ64GP204 dsPIC33FJ64GP206 dsPIC33FJ64GP306 dsPIC33FJ64GP310 dsPIC33FJ64GP706 dsPIC33FJ64GP708 dsPIC33FJ64GP710 dsPIC33FJ64GP802 dsPIC33FJ64GP804 dsPIC33FJ128GP202 dsPIC33FJ128GP204 dsPIC33FJ128GP206 dsPIC33FJ128GP306 dsPIC33FJ128GP310 dsPIC33FJ128GP706 dsPIC33FJ128GP708 dsPIC33FJ128GP710 dsPIC33FJ256GP506 dsPIC33FJ256GP510 dsPIC33FJ256GP710 dsPIC33FJ128GP802 dsPIC33FJ128GP804 dsPIC33FJ12MC201 dsPIC33FJ12MC202 dsPIC33FJ16MC304 dsPIC33FJ32MC202 dsPIC33FJ32MC204 dsPIC33FJ32MC302 dsPIC33FJ32MC304 dsPIC33FJ64MC202 dsPIC33FJ64MC204 dsPIC33FJ64MC506 dsPIC33FJ64MC508 dsPIC33FJ64MC510 dsPIC33FJ64MC706 dsPIC33FJ64MC710 dsPIC33FJ64MC802 dsPIC33FJ64MC804 dsPIC33FJ128MC202 dsPIC33FJ128MC204 dsPIC33FJ128MC506 dsPIC33FJ128MC510 dsPIC33FJ128MC706 dsPIC33FJ128MC708 dsPIC33FJ128MC710 dsPIC33FJ256MC510 dsPIC33FJ256MC710 dsPIC33FJ128MC802 dsPIC33FJ128MC804 dsPIC30 Devices --------------- dsPIC30F2010 dsPIC30F2011 dsPIC30F2012 dsPIC30F3010 dsPIC30F3011 dsPIC30F3012 dsPIC30F3013 dsPIC30F3014 dsPIC30F4011 dsPIC30F4012 dsPIC30F4013 dsPIC30F5011^ dsPIC30F5013^ dsPIC30F5015 dsPIC30F5016 dsPIC30F6010A dsPIC30F6011A dsPIC30F6012A dsPIC30F6013A dsPIC30F6014A dsPIC30F6015 ^ These 2 devices are not supported for low VDD programming. dsPIC30 SMPS Devices -------------------- dsPIC30F1010 dsPIC30F2020 dsPIC30F2023 PIC32 Devices -------------------- PIC32MX320F032H PIC32MX320F064H PIC32MX320F128L PIC32MX320F128H PIC32MX340F128H PIC32MX340F128L PIC32MX340F256H PIC32MX340F512H* PIC32MX360F256L PIC32MX360F512L PIC32MX420F032H PIC32MX440F128L PIC32MX440F128H PIC32MX440F256H PIC32MX440F512H PIC32MX460F256L PIC32MX460F512L KEELOQ HCS Devices ------------------ HCS200 HCS201 HCS300 HCS301 HCS320 HCS360 HCS361 HCS362 HCSxxx File -> Import HEx Notes: The first line only may be imported from SQTP *.NUM files generated by the KEELOQ tool in MPLAB. Connections for HCS devices --------------------------------------- PICkit 2 Pin HCS Device Pin (2) Vdd 8 (3) GND 5 (5) PGC /3 HCS20x, 320 \3 -or- 4 HCS30x, 36x (4) PGD 6 (1) VPP 2 HCS360, 361 only MCP250xx CAN Devices -------------------- MCP25020 MCP25025 MCP25050 MCP25055 !!IMPORTANT!! - MCP250xx devices are OTP and can only be programmed once. Connections for MCP250xx devices --------------------------------------- PICkit 2 Pin MCP Device Pin (DIP) (1) Vpp 11 Vpp (2) Vdd 14 VDD - The MCP device MUST be powered from PICkit 2! (3) GND 7 Vss (4) PGD 5 DATA (5) PGC 6 CLOCK Serial EEPROM Devices --------------------- NOTE: Other supported voltage grades are listed in parentheses next to the device. Select the "LC" part number to program these other voltage grades. 11LC010 (AA) 11LC020 (AA) 11LC040 (AA) 11LC080 (AA) 11LC160 (AA) 24LC00 (AA)(C) 25LC010A (AA) 24LC01B (AA) 25LC020A (AA) 24LC02B (AA) 25LC040A (AA) 24LC04B (AA) 25LC080A (AA) 24LC08B (AA) 25LC080B (AA) 24LC16B (AA) 25LC160A (AA) 24LC32A (AA) 25LC160B (AA) 24LC64 (AA)(FC) 25LC320A (AA) 24LC128 (AA)(FC) 25LC640A (AA) 24LC256 (AA)(FC) 25LC128 (AA) 24LC512 (AA)(FC) 25LC256 (AA) 24LC1025 (AA)(FC) 25LC512 (AA) 25LC1024 (AA) 93LC46A/B/C (AA)(-C) 93LC56A/B/C (AA)(-C) 93LC66A/B/C (AA)(-C) 93LC76A/B/C (AA)(-C) 93LC86A/B/C (AA)(-C) Connections for 11LC devices --------------------------------------- PICkit 2 Pin 11LC Device Pin (DIP) (2) Vdd ! 8 Vcc (3) GND 4 Vss (6) AUX 5 SCIO ! 11LC devices may not program properly below 3.6V VDD. This is a limitation of the PICkit 2 AUX IO pin. Connections for 24LC devices --------------------------------------- PICkit 2 Pin 24LC Device Pin (DIP) (2) Vdd ! 8 Vcc (3) GND 4 Vss (5) PGC 6 SCL (driven as push-pull) (6) AUX 5 SDA (requires pullup) 7 WP - disabled (GND) 1, 2, 3 Ax pins Connect to Vdd or GND per datasheet and to set address ! 24LC devices may not program properly below 3.6V VDD. This is a limitation of the PICkit 2 AUX IO pin. Connections for 25LC devices --------------------------------------- PICkit 2 Pin 25LC Device Pin (DIP) (1) VPP 1 nCS (2) Vdd 8 Vcc (3) GND 4 Vss (4) PGD 2 SO (5) PGC 6 SCK (6) AUX 5 SI 7 nHOLD - disabled (Vdd) 3 nWP - disabled (Vdd) Connections for 93LC devices --------------------------------------- PICkit 2 Pin 93LC Device Pin (DIP) (1) VPP 1 CS (2) Vdd 8 Vcc (3) GND 5 Vss (4) PGD 4 DO (5) PGC 2 CLK (6) AUX 3 DI 7 PE - enabled (Vdd) 6 'C' Device ORG Set to select word size ----------------------------------------------------------------- 2. Operating System Support List ----------------------------------------------------------------- This tool has been tested under the following operating systems: Windows XP Windows Vista 32-bit Windows Vista 64-bit (Preliminary Testing Only) NOTE: In Windows Vista, the PICkit2.INI file may be found in C:\Users\\AppData\Local\VirtualStore\Program Files\Microchip\PICkit 2 v2 ----------------------------------------------------------------- 3. Release notes V2.61.00 ----------------------------------------------------------------- New Features: ------------- > Programmer-To-Go updated to support 3rd party PICkit 2 workalike devices with more Programmer-To-Go memory. Bug Fixes: ------------- > PIC18F97J60 programming bug in device file v1.60 fixed > PIC24FJ programming problems introduced in software v2.60 fixed > Configuration Editor display issue in some Asian editions of Windows addressed. ----------------------------------------------------------------- Release notes V2.60.00 ----------------------------------------------------------------- New Features: ------------- > Low Voltage Programming mode support Low voltage programming mode (LVP) is now supported for all PICkit 2 supported devices which feature this option. Refer to the device datasheet and programming specification for information on the LVP programming mode. LVP programming mode is enabled by the menu "Tools > User LVP Program Entry" This can only be enabled in Manual Device Select mode. When enabled, the text "LVP" in red will appear above the Device select combo-box. For devices using the PGM pin in LVP mode, PICkit 2 ICSP connector pin 6 AUX must be connected to the device PGM pin. NOTE: LVP mode may only be used with devices that *already* have the LVP configuration bit enabled. Blank devices always have the LVP bit enabled. NOTE: For PIC24F--KA-- devices, this option becomes "Tools > Use High Voltage Program Entry" This mode MUST be used with PIC24F--KA-- devices that have the MCLR pin disabled (used as IO) or PICkit 2 will not be able to detect or program the device. NOTE: LVP may be used with PICkit 2 Programmer-To-Go. Enable "Tools > User LVP Program Entry" before starting the Programmer-To-Go wizard. > New Configuration Word Editor The editor dialog is opened by clicking on the "Configuration" text nest to the configuration word values in the main PICkit 2 display. The editor allows editing of the individual bits in the configuration words, but the user must reference the device datasheet for the meanings of each bit. The PICkit 2 software does not contain a database of the names of the configuration bitfields and the meaning of their values. > New menus Tools > Display Unimplemented Config Bits This menu allows the user to choose how unimplemented Configuration Word bits are displayed. In previous versions, unimplemented bits were always displayed as '0' value. This did not always match the way MPLAB IDE displayed these "don't care" bits. Options are to display as '0' (default), as '1', or as the value in the imported HEX file / as they were read from the device. > Faster PIC18F6xJxx, 8xJxx programming times > In Manual Device Select mode, PICkit 2 will now verify the Device ID of the target device matches that of the selected device. If no device ID is detected, an error is generated. If the Device ID of a different device is detected, the name of the matching device will be shown. NOTE: To turn this feature off, edit the pickit2.ini file and change the entry for DVER: to N. Ex DVER: N Bug Fixes: ------------- > Fixed some instances of the PICkit 2 software hanging on Reads, during Verify, or Blank Check with some chipsets. > When importing a hex file, PICkit 2 should no longer warn when unused configuration words (with no implemented bits) are not contained in the HEX file. The exceptions are some dsPIC30F words that contain reserved bits. The warning may be ignored for these cases. > Fixed an issue when programming PIC24FJ appplication code that self-modifies program memory. Such code should no longer cause Verify during a Write operation to fail. > Baseline and Midrange checksums should now be computed correctly when Code Protect (CP) is enabled. > Fixed an issue where the silicon revision was sometimes displayed with junk in the upper word of the value. NOTE: silicon revision display is enalbed byt adding the INI file value "REVS: Y" > Alert Sounds will now point to the correct location for the default sounds if the software is not installed in the default location. > Fixed an issue with the progress bar display during writes and verifies when using the PE with PIC24 and dsPIC33 devices. > Fixed an issue where "Tools > Use VPP First Program Entry" may not have had any effect in Manual Device Select mode. > Fixed an issue where the "Fail" alert sound was sometimes played when downloading a memory image to Programmer-To-Go even when the download was successful. > When Manual Device Select mode is active, the entire Programmer menu is no longer inaccessible when no device has been selected. This allows Manual Device Select mode to be exited without having to select a device first. ----------------------------------------------------------------- Release notes V2.55.02 ----------------------------------------------------------------- Bug Fixes: ------------- > Updates the PIC32 Programming Executive to v0109. The prior version caused problems programming some PIC32 devices. See below for additional updates in V2.55.xx ----------------------------------------------------------------- Release notes V2.55.01 ----------------------------------------------------------------- Bug Fixes: ------------- > Fixes a UART Tool update rate issue introduced in V2.55.00 See below for additional updates in V2.55.xx ----------------------------------------------------------------- Release notes V2.55.00 ----------------------------------------------------------------- New Features: ------------- > Faster PIC24 & dsPIC33 programming PICkit 2 now supports use of the Enhanced ICSP programming mode using the Programming Executive (PE) for these devices. In addition to faster programming times, use of the PE provides the following: PIC24H & dsPIC33F: - Includes the Device ID corruption errata workaround - Verify is done using a 16-bit CRC and is very quick - Blank Check is done in the PE and is very quick PIC24F: - Verify is still done by reading out the device and benefits from faster PE reads - Blank Check is still done by reading out the device and benefits from faster PE reads The PE is never used for devices with < 4096 instruction flash sizes. Use of the PE may be disabled with programming reverting to basic ICSP as used in previous releases as follows: PIC24H & dsPIC33: - Edit PICkit2.INI to set the following entry to 'N': PE33: N - To re-enable, edit the INI file and change the entry back to 'Y' - NOTE: Reverting to ICSP mode no longer protects against the Device ID corruption errata PIC24F: - Edit PICkit2.INI to set the following entry to 'N': PE24: N - To re-enable, edit the INI file and change the entry back to 'Y' NOTE: PICkit 2 Programmer-To-Go does not use the PE in this release, and still uses basic ICSP programming. > Import/Export of binary (*.bin) files for serial EEPROMs When a serial EEPROM device is selected as the current device, *.bin binary files may be imported and exported in addition to *.hex files. NOTE: A file MUST have the .bin extension to be imported or exported as a binary file. Any other extension will be treated as a hex format file > The UART Tool Hex mode allows direct typing In HEX mode, when the display is selected hex characters may be typed directly. When the first nibble is typed, it is shown below the display as "Type Hex : 0_" where '0' is the first nibble value. When a second nibble character is typed, the byte is transmitted. The first nibble may be cancelled by pressing ESC or typing any non-hex character. > New menu option "Programmer > Alert Sounds.." This option brings up a dialog to optionally select and enable playing of WAV sound files on success, warning, and/or error events in the status window. A default WAV sound for each is included with the installion in the "Sounds" subdirectory of the PICkit 2 program directory. Bug Fixes: ------------- > (Device file v1.53) Fixed an issue with PI32MX4xx device config masks not including USB configuration bits. > (Device file v1.53) PIC18F no longer reports verify errors or reads certain locations improperly when ETBR table read protect bits are asserted. > Fixed UART Tool issue where siginifcant amounts of received data without a newline (ASCII mode) or transmission pause (HEX mode) would cause sluggishness and lockups of the UART Tool software. > Unit ID maximum length set to 14 characters due to a firmware issue. > Tools > Troubleshoot... dialog 30kHZ waveform is closer to 30kHz and no longer has breaks in the waveform. This issue originated with the firmware v2.3x update. NOTE: The test waveform is only intended to check the edge rise and fall rates of the PGx signals. The waveform still contains significant jitter and is only approximately 30kHz in frequency. ----------------------------------------------------------------- Release notes V2.52.00 ----------------------------------------------------------------- New Features: ------------- > Menu option "Programmer > Clear Memory Buffers on Erase" allows the user to select whether or not the application device memory buffers (Program Memory, EEPROM Data, User IDs, and Configuration) are cleared to blank values or remain unchanged when an "Erase" operation is performed. In prior versions, the behavior has been to always clear the buffers on an "Erase." Bug Fixes: ------------- > Fixed a multiple PICkit 2 support critical issue that was causing simultaneous use of multiple PICkit 2 units to fail. This fix requires firmware version 2.32.00 for the PICkit 2 OS. > Fixed a dsPIC33/PIC24HJ Programmer-To-Go problem causing verify of devices to fail in Programmer-To-Go mode when Config 8 was not defined in the hex file. > Fixed an issue causing the application to crash when programming PIC32 devices with completely blank Boot Flash. ----------------------------------------------------------------- Release notes V2.51.00 ----------------------------------------------------------------- New Features: ------------- > Logic Tool dialog now allows the PICkit 2 VDD to be turned ON and OFF from the dialog via the "VDD On" checkbox. NOTE: the voltage value must still be set in the main form. > UART Tool dialog now allows the PICkit 2 VDD to be turned ON and OFF from the dialog via the "VDD" checkbox. NOTE: the voltage value must still be set in the main form. The VDD checkbox will be disabled when the UART Tool is "Connected" To change the VDD setting, the UART Tool must be "Disconnected" Bug Fixes: ------------- > Fix for Programmer-To-Go hanging on download for program sizes greater than half the maximum allowed. > Fix for PICkit 2 operational problems after exiting Programmer- To-Go mode. (Including reading junk data, failure to program, and odd VDD behavior). > Corrected UART Tool Custom Baud dialog size. > Reads of PIC32 devices now display "done" at completion. > Added 100ms delays to PIC32 Program Executive download to fix errors in some instances. ----------------------------------------------------------------- Release notes V2.50.02 ----------------------------------------------------------------- Bug Fixes: ------------- > Fix to try to prevent the problem of PICkit 2 windows "disappearing" by opening off screen. If a problem is still found (Pk2 shows up in taskbar, but no window is visible & it's not minimized) the best solution is to close the PICkit 2 application (right-click task bar icon and select "Close"), then delete the INI file. > Disables Tools > UART Tool and Tools > Logic Tool when no PICkit 2 unit is available > Addresses issues with multiple PICkit 2 unit support: - When the selected unit is in bootloader, no longer asks twice to select a unit. - Fix for a "Download Failed" issue when updating a unit with other units connected to the PC. - After updating a unit's OS, it will open the dialog asking the user to select a unit (if more than 1 are present). After the update reset, the unit may enumerate with a different USB ID. *** IMPORTANT NOTES WHEN USING MULTIPLE PICKIT 2 UNITS *** * * * 1) When updating a unit's OS, it is strongly recommended * * that it be the only unit connected. * * 2) Never connect more than 1 PICkit 2 with firmware OS * * earlier than v2.30.01. It may crash the PICkit 2 app * * and/or Windows. * * 3) Never connect more than 1 PICkit 2 in Bootloader mode * * ("Busy" LED blinking slowly). This may crash Windows. * * 4) Never update the firmware OS of a unit when another unit * * in bootloader mode is connected, or has OS earlier than * * v2.30.00 * * 5) The PIckit 2 Programmer Application will detect up to a * * maximum of 8 connected PICkit 2 units. * ***************************************************************** ----------------------------------------------------------------- Release notes V2.50.01 ----------------------------------------------------------------- Bug Fixes: ------------- > Requires firmware v2.30.01 which fixes an issue with 24LC serial EEPROM reads. ----------------------------------------------------------------- Release notes V2.50.00 ----------------------------------------------------------------- New Features: ------------- > PIC32 Device Support See section 2 of this file for specific part numbers supported. ASCII view options are not available for PIC32 devices, and Fast Programming is always enabled. > Multiple PICkit 2 unit support on one PC Multiple PICkit 2 units may be used with multiple instances of the PICkit 2 Programmer application and with MPLAB. For example, one might be used in MPLAB as a debugger, a 2nd with the UART Tool, and a 3rd with the Logic Tool. When opening the PICkit 2 application or selecting "Tools > Check Communications" a dialog will open if multiple units are found. The dialog lists all connected PICkit 2 units and their assigned UnitID string, and is used to select a unit to use. Versions of MPLAB that are not aware of multiple units (v8.10 and earlier) will use the PICkit 2 unit listed in the dialog as Unit# = 0. > Multiple Window View option with resizable memory windows. New in v2.50.00 is the "View" menu, with two selectable view options: "Single Window" - this is the default window used by prior versions. "Multi-Window" - The PICkit 2 application window is divided up into 3 windows: Main Window - essentially, the top of the Single Window display. Program Memory - Program memory contents are displayed in a separate re-sizable window. EEPROM Data - separate resizable window with device EEPROM contents. The EEPROM Data window is only displayed for devices which have internal EEPROM memory. Both memory region windows may also be closed or minimized, reducing the screen footprint of the application to only the Main Window. Close memory windows may be opened by selecting them under the "View" menu. The "Associate / Memory Displays in Front" option associates the windows so they move, minimize, and come into focus together. It also shows memory displays always in front of the main window. If this option creates problems with a particular display, it can be unchecked to disable it. NOTE: If a multi-window display problem occurs, or a window is "lost", the defaults can be restored by deleting the PICkit2.INI file in the installation directory. > PICkit 2 Programmer-To-Go This new functionality allows a memory image to be downloaded to the PICkit 2 and programmed later without a PC. All PIC MCU families are supported with the exception of PIC32. See "Help > Programmer-To-Go User Guide" for more information. > Manual Device Select "Programmer > Manual Device Select" may used to select devices in all families from a drop-down box. This can be useful for importing HEX files to view when no device is present, and to download a memory image for Programmer-To-Go when a device is not avaiable to connect. > Logic Tool The Logic Tool, available under "Tools > Logic Tool" allows the PICkit 2 to be used to provide stimulus to and monitor signals in a target circuit. It also provides a 3-channel logic analyzer with complex trigger options. See "Help > Logic Tool User Guide" for more information. > UART Tool VDD When using the UART Tool, the PICkit 2 unit may supply VDD to the target circuit. The UART tool is now documented in the PICkit 2 User's Guide. > Memory display select & copy data The contents of the Program Memory display and EEPROM Data display may be selected and copied. Use the mouse with click and drag to select portions of the memory data. Right click and select "Select All" or press ctrl-A to select the entire memory contents. Right click and select "Copy" or press ctrl-C to copy the data to the clipboard. The selected addresses and data are copied to the clipboard as tab-delimited text. This works with both View options. > Display of HEX file Code / Data Protect settings When a hex file with Code Protect and/or Data Protect bits asserted in the Configuration bits is loaded, this is noted by displaying "Code/Data/All Protect" next to the Configuration Word(s) display. Similarly, the protect settings are noted for Configuration read from a device. Note that protection settings in an imported hex file or read from a device may not be turned off in the application. > MCP250xx CAN device programming support. See section 2 for specific part numbers. IMPORTANT: These devices are One- Time-Programmable (OTP) and CANNOT be reprogrammed. Also, the devices MUST be powered from PICkit 2 during programming. > PIC18 J-series programming change PICkit 2 v2.50 changes the way Configuration words are programmed to match the behavior of the MPLAB IDE. When programming, the upper nibble of configuration words is always set to hex "F". When erasing, unused configuration bits are masked off to "0". > PIC24FJ programming change PICkit 2 v2.50 changes the way Configuration words are programmed to match the behavior of the MPLAB IDE. When programming, the upper byte of configuration locations is always set to hex "FF". Unimplemented bits are shown as '1' in the Program Memory window. > PIC24HJ / dsPIC33FJ Programming change PICkit 2 v2.50 now always disables the JTAGEN configuration bit. > The PICkit 2 application window remembers its last location on the screen when closed and re-opened. > Warns if the hex file contains settings for some Configuration Words but not others. > Now displays 16-bit device revisions when REVS: is enabled in the INI file. > Preliminary Microsoft Windows Vista 64-bit OS support. Bug Fixes: ------------- > Fixed an issue where application could not open the Device File if it did not have write permissions in the application directory. > Fixed display issues with DPI settings other than 96 (Normal) > When the attached PICkit 2 is in Bootloader mode, the "Help > About" dialog now correctly reports the bootloader version. > Fixed an issue where the view mode was always reset to "Hex Only" > The "Write on PICkit Button" no longer programs endlessly when the button is held down. It programs once and waits for the button to be released. > Fixed issues with detection on PIC18 K-Series devices erasing or corrupting Midrange devices on startup or when selecting "Check Communication". > Fixed issue with 16F5x baseline hex import, which could cause configuration verify errors when programming. ----------------------------------------------------------------- Release notes V2.40.00 ----------------------------------------------------------------- New Features: ------------- > New menu option "Tools -> Use VPP First Program Entry" When selected, can allow PICkit 2 to connect to and program devices with configurations and code that intereferes with the ICSP signal pins. Symptoms that might require turning this option on include Writing a device and getting a 'Verification of configuration failed.' error, and not being able to connect to the device for further programming operations. NOTE that when this option is enabled, the target MUST be powered from the PICkit 2 VDD pin. It will not work with target-powered devices. > VDD set value retained across application sessions. When the PICkit 2 Programmer application is opened, the value in the VDD set box when the application was last closed will be restored. However, if a part is detected from a device family different than the family that was active when the application was last closed, the VDD box value will not be restored and it will be set to a default value. For example: When the application was closed: PIC18F family was active, VDD was set to 3.1V Then when restarted: If PIC18F device is detected - VDD is restored to 3.1V If no device detected - VDD is restored to 3.1V (Family is defaulted to last used) If Midrange PIC16F device detected - VDD defaults to 5.0V (any family besides last used (18F), VDD set default) > Calibrate Vdd & Set Unit ID This option under the "Tools" menu allows the PICkit 2 Vdd output voltage to be calibrated using a Volt Meter. This also increases the accuracy of detected voltages for powered targets. Frequently accuracies within 2% can be achieved. NOTE: Since the PICkit 2 voltages are referenced to the USB voltage, the calibration may not be valid if the PICkit 2 is moved to another USB port or host PC. NOTE: The PICkit 2 VDD output high end is still limited by the USB voltage and the D4 diode drop. The calibration is stored in the PICkit 2 unit, so a unit will remain calibrated when used with the MPLAB IDE. A Unit ID may also be assigned to a PICkit 2 unit. The PICkit 2 programmer application will identify the attached PICkit 2 unit with the ID in the application title bar. This can be useful in keeping track of and identifying multiple PICkit 2 units. NOTE: This menu option is not available if memory editing has been disabled with an "EDIT: N" entry in the INI file. See "Release notes V2.01.00" for more information. > OSCCAL instruction verification. For devices with an OSCCAL oscillator calibration value instruction in the last location of program memory, the PICkit 2 GUI will indicate if an invalid instruction value is detected in the Device Configuration display. During a WRITE or ERASE operation, if an invalid OSCCAL value is detected, the application will warn the user and give them the option to abort the operation or continue. > KEELOQ HCS part support. HCSxxx File -> Import HEx Notes: The first line only may be imported from SQTP *.NUM files generated by the KEELOQ tool in MPLAB. Connections for HCS devices --------------------------------------- PICkit 2 Pin HCS Device Pin (2) Vdd 8 (3) GND 5 (5) PGC /3 HCS20x, 320 \3 -or- 4 HCS30x, 36x (4) PGD 6 (1) VPP 2 HCS360, 361 only > Serial EEPROM support: 24LC I2C bus devices: Bus Speed- 400kHz with Tools -> Fast Programming checked 100kHz with Tools -> Fast Programming unchecked NOTE: Bus pullups are required for all programming operations. 400kHz requires 2k Ohm pullups. Ax Chip Select checkboxes- These are only enabled for devices that support address chip selects, and allow programming of multiple devices on the same bus. Connections for 24LC devices --------------------------------------- PICkit 2 Pin 24LC Device Pin (DIP) (2) Vdd 8 Vcc (3) GND 4 Vss (5) PGC 6 SCL (driven as push-pull) (6) AUX 5 SDA (requires pullup) 7 WP - disabled (GND) 1, 2, 3 Ax pins Connect to Vdd or GND per datasheet and to set address 25LC SPI bus devices: Bus Speed- ~925kHz with Tools -> Fast Programming checked ~245kHz with Tools -> Fast Programming unchecked Connections for 25LC devices --------------------------------------- PICkit 2 Pin 25LC Device Pin (DIP) (1) VPP 1 nCS (2) Vdd 8 Vcc (3) GND 4 Vss (4) PGD 2 SO (5) PGC 6 SCK (6) AUX 5 SI 7 nHOLD - disabled (Vdd) 3 nWP - disabled (Vdd) 93LC Microwire bus devices: Bus Speed- ~925kHz with Tools -> Fast Programming checked ~245kHz with Tools -> Fast Programming unchecked Connections for 93LC devices --------------------------------------- PICkit 2 Pin 93LC Device Pin (DIP) (1) VPP 1 CS (2) Vdd 8 Vcc (3) GND 5 Vss (4) PGD 4 DO (5) PGC 2 CLK (6) AUX 3 DI 7 PE - enabled (Vdd) 6 'C' Device ORG Set to select word size > UART Tool The UART Communication Tool, available under the "Tools" menu, allows the PIckit 2 to be used as a serial UART interface for communicating with a microcontroller. Potential uses include: - Display debug text output from the microcontroller - Logging microcontroller data to a text file - Developing & debugging a serial UART interface - Sending commands to the microcontroller during development The PICkit 2 unit connects as follows: PICkit 2 Pin Target UART (1) VPP (2) Vdd Vdd (Vcc) (3) GND GND (4) PGD TX - inverted, logic level (5) PGC RX - inverted, logic level (6) AUX IMPORTANT CONNECTION NOTES: PICkit 2 cannot supply Vdd when using the UART Tool. The PICkit 2 Vdd pin MUST be connected to the target UART Vdd or it will not work. TX & RX signals are inverted (Start Bit = GND, Stop Bit = Vdd) at logic levels. The PICkit 2 CANNOT be connected to RS-232 +/- 12V signals. The UART Tool window may be resized (expanded) and the PICkit 2 BUSY LED acts as an activity light (for both RX & TX) Baud Rate: The baud rate is selectable from the dropdown box in the upper left corner. Common rates are included, however by selecting "Custom..." any baud rate from 150 to 38400 in 1 baud increments may be used. Connect/Disconnect: The baud rate can only be changed when Disconnect is selected. Data will only be received and trasmitted when Connect is selected. Mode : ASCII - Received bytes are displayed as ASCII characters. - Bytes are transmitted by typing on the keyboard, using the String Macros, or pasting text. - Transmitted data is not displayed unless "Echo On" is checked. - If "Append CR + LF" is checked, then when "Send" is clicked for a String Macro, an extra two bytes comprising of a Carriage Return (0x0D) and Line Feed (0x0A) are sent after the string data. - A New Line is displayed when both a Carriage Return and Line Feed are received. Individually, they will display as a box character. Mode : Hex - Received bytes are displayed as hex values preceded by "RX: " - Bytes are transmitted only by using the Hex Sequence boxes. Transmitted bytes are always displayed as hex values preceded by "TX: " String Macros / Hex Sequences: These text boxes allow strings of ASCII characters or hex bytes to be entered and sent all at once by clicking the "Send" button. They can also be used for frequently used string commands. In ASCII mode, each box has a limit of 60 characters. In Hex mode, each box has a limit of 48 bytes. Wrap Text: In either mode, determines whether text without a newline will wrap at the right edge of the display area, or be displayed on a single line with a horizontal scroll bar. The display will keep about 200 lines of received text in the buffer. Log to File: Allows received & transmitted data to be saved to a text file as it appears in the display area. Only data received and transmitted after the logfile is opened will be saved. Existing data in the display is not saved. While logging data, the button turns green. To stop logging data and close the file, click the button again. Clear Screen: Clears the display buffer. Does not affect log file. Exit UART Tool: Returns to the PICkit 2 Programmer interface. > New Operating System firmware v2.10. If you are using a version of MPLAB IDE prior to 7.62, it will want to reprogram the firmware to an earlier version. If you switch between applications frequently and want to prevent this, do the following - Copy the file: C:\Program Files\Microchip\PICkit 2 v2\PK2V021000.hex into: C:\Program Files\Microchip\MPLAB IDE\PICkit 2\ Thanks to Lanchon, xiaofan, and many other users & Microchip forum members for all their suggestions, comments, and feedback. ----------------------------------------------------------------- Release notes V2.30.00 ----------------------------------------------------------------- New Features: ------------- > File - Import Hex and File - Export Hex are now affected by the memory region checkboxes for parts with EEPROM data. During import, unchecked regions will not be imported and the existing memory buffer contents will be unchanged (unless a different part is detected.) During export, unchecked memory regions will not be included in the saved hex file. This allows only EEPROM data to be imported from a hex file, for example, or all data except EEPROM. On export, it allows creation of a hex file without EEPROM data, or with only EEPROM data. > For Vdd = 3.6V Max parts, now sets voltage to a nominal 3.3V. > New view format for Program Memory and EEPROM Data "Word ASCII" displays the same as"Hex+ASCII" in prior releases. ASCII characters are displayed in the same order bytes appear in the memory word. Ex: '694D 7263 636F 6968 iM rc co ih' "Byte ASCII" - new display format where ASCII characters are displayed in memory byte order with a space in between. This gives better readability to strings in memory. Ex: '694D 7263 636F 6968 M i c r o c h i' > Low Vdd programming of selected Midrange parts, all PIC18F, and most dsPIC30F parts. ----------------------------------------------------- |NOTE: Low Vdd programming WILL NOT WORK if any | |config code, data, or write protect bits are active! | ----------------------------------------------------- ----------------------------------------------------- |NOTE: This is not the same as LVP programming, which | |uses the PGM pin for program mode entry. | ----------------------------------------------------- Previously, programming always used a Bulk Erase which required a minimum Vdd of 4.5V for Midrange parts, many PIC18F parts, and dsPIC30F parts. Midrange: Some Midrange parts support a flash row erase process at below 4.5V. These devices are now supported for programming at Vdd < 4.5V using the row erase. See the device support list for supported parts. PIC18F: All PIC18F parts now program down to 3.0V. Some will program at lower voltages; the user will be warned if the voltage is too low. dsPIC30F: Most dSPIC10F devices now program down to 3.0V. The exceptions are the dsPIC30F5011 and dsPIC30F5013. ----------------------------------------------------- |NOTE: The [ERASE] button/menu still uses Bulk Erase | |only. | ----------------------------------------------------- Therefore, [ERASE] cannot be used at voltages below the Bulk Erase minimum Vdd. Parts that support the low Vdd programming can be left erased by following these steps: 1) Connect to the device 2) Select menu Device Family -> {family of device in use} This clears all buffers to the erased state 3) Click [WRITE] 4) The device is now in a completely erased state. (NOTE this will not work if any protect bits are set) Bug Fixes: ---------- > Fixed issue with PIC18F config bit WRTC preventing the programming of CONFIG7. > Fixed issue with EEPROM read. When PICkit 2 was started with no device attached, then a device was attached and the first operation was a read, EEPROM Data memory would not be read. Now corrected. Firmware Update: ---------------- > This version requires firmware v2.02.00. MPLAB IDE version 7.60 and prior will detect the new version and ask to download v2.01. However, it is safe to use v2.02 with these MPLAB IDE releases. ----------------------------------------------------------------- Release notes V2.20.04 ----------------------------------------------------------------- Bug Fixes: ---------- > Fixed handle issue causing crashes with Program On PICkit Button ----------------------------------------------------------------- Release notes V2.20.00 ----------------------------------------------------------------- New Features: ------------- > dsPIC30 support > PIC18LF_J_ support: NOTE: If these devices do not have VDDCORE being supplied by an external regulator from the general VDD (that is able to handle 3.6 Volts), but VDDCORE is powered directly from the PICkit 2 VDD output, the following precautionary steps must be taken. These prevent a potentially damaging overvoltage on VDDCORE: Step 1 - Do not connect the target device to the PICkit 2 unit when opening the programming application. Step 2 - After the application is opened, select Menu "Device Family > PIC18F_J_" (if this is not the current family) Step 3 - Change the "VDD PICkit 2" voltage box to between 2.5 and 2.7 Volts Step 4 - Connect the target device to the PICkit 2 unit. Step 5 - Detect the device by either trying a programming operation (such as Read) or again selecting menu "Device Family > PIC18F_J_" Bug Fixes: ---------- > Fix issue with with Erase voltage warning dialog and Auto- Import-Write that was causing an exception. ----------------------------------------------------------------- Release notes V2.11.00 ----------------------------------------------------------------- New Features: ------------- > Imports/exports new MPLAB PIC24HJ and dsPIC33 HEX file format Bug Fixes: ---------- > Baseline & Midrange hex files imported with Code Protect config bit asserted now display correct checksum > PIC18F hex files imported with add Code Protect config bits asserted now display correct checksum NOTE: PIC18F hex fies imported with only some (not all) CP bits will display a checksum not matching MPLAB > Code Protect masks for PIC24HJ and dsPIC33 parts updated ----------------------------------------------------------------- Release notes V2.10.01 ----------------------------------------------------------------- New Features: ------------- > 44-Pin Demo Board User's Guide included with installation and linked to under "Help" menu. > 'Tools > Write on PICkit Button' state now saved in INI file. > If an Auto-Import-Write fails,the button is now left enabled to more easily retry. Bug Fixes: ---------- > Auto-Import-Write function no longer locks up if VDD is set to "Force Target" and no target power is present. Also, when set to "Auto-Detect", popup dialogs indicating new power mode are suppressed. ----------------------------------------------------------------- Release notes V2.10.00 ----------------------------------------------------------------- New Features: ------------- > dsPIC33FJ support and PIC24HJ support > Better support of devices with configuration set for /MCLR OFF > Troubleshooting Wizard for assistance debugging ICSP connections. > Added Programmer -> Hold Device in Reset and /MCLR checkbox Allows control over device /MCLR signal. (Active low when selected, tri-state when not) > Frequently used menu items have keyboard shortcuts. > Auto functionality added to Import HEx & Write Device. When selected hex file is updated, it is automatically imported and written to the device. ----------------------------------------------------------------- Release notes V2.01.00 ----------------------------------------------------------------- New Features: ------------- > PIC24FJ part support > Significantly faster programming times for PIC18F > ASCII views of data > File menu import history > Verify on Write can be turned off > Verify and Blank Check will stop on the first error, and report the location of the error. > Begin programming on PICkit 2 button. > Separate enables for Program Memory and Data Memory Code Protects. > Target VDD support may be set to Auto-Detect Always Powered from PICkit 2 Always Powered by Target Board > Selectable programming speed for heavily loaded ICSP lines > Pop-up with memory address on program memory and data memory > Menu settings are remembered the next time the application is started. > Memory Region Selection: The following programmer functions will always operate on all regions of device memory, regardless of memory region select checkboxes: Programmer -> Erase programmer -> Blank Check For devices with EEPROM Data Memory, the checkboxes will affect the following programmer functions: Programmer -> Read (including Read & Export button) Programmer -> Write (including Import & Write button) Programmer -> Verify The regions affected are as follows: Program Checkbox: EE Data Checkbox: Read/Write/Verify: ----------------- ----------------- ------------------ [X] [X] All regions [X] [ ] Program Memory, UserIDs, Config Word(s)* [ ] [X] EE Data only* [ ] [ ] - not allowed - *NOTE that region selections may not work properly if code protect, data protect, or write protects are presently active in the device. Program Memory and EEPROM Data editing: --------------------------------------- By default, program memory and EEPROM data may be edited in the display windows. To disable this feature, edit the INI file C:\Program Files\Microchip\PICkit 2 v2\PICkit2.ini (Created when the application is first run) Change the "EDIT" parameter to "N": EDIT: N
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (17)
Qty
Description
R-US_

R3, R8, R20, R14, R2, R16, R15, R11, R9, R13, R19, R4, R1, R18, R21, R22, R6, R10, R5, R12, R7, R17

22
rcl:R-US_:0207/10
BSS110

Q1, Q4, Q6

3
transistor-fet:BSS110:
C-US

C4, C1, C11, C10, C7

5
rcl:C-US:050-025X075
LED

D3, D5, D4

3
led:LED:5MM

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components