Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
The 9DOF Razor IMU incorporates three sensors - an (triple-axis gyro), (triple-axis accelerometer), and (triple-axis magnetometer) - to give you nine degrees of inertial measurement. The outputs of all sensors are processed by an on-board ATmega328 and output over a serial interface. With the work of and many others, the 9DOF Razor can become an . This enables the 9DOF Razor to become a very powerful control mechanism for UAVs, autonomous vehicles and image stabilization systems. The board comes programmed with the 8MHz Arduino bootloader and example firmware that tests the outputs of all the sensors. Simply connect to the serial TX and RX pins with a , open a terminal program to 38400bps and a menu will guide you through testing the sensors. You can use the Arduino IDE to program your code onto the 9DOF, just select the 'Arduino Pro or Pro MiniĀ  (3.3v, 8mhz) w/ATmega328' as your board. The 9DOF operates at 3.3VDC; any power supplied to the white JST connector will be regulated down to this operating voltage - our LiPo batteries are an excellent power supply choice. The output header is designed to mate with our board, so you can easily connect the board to a computer's USB port. Or, for a wireless solution, it can be connected to the or an . Project description, more information and ordering can be found at https://www.sparkfun.com/products/10125 Test Firmware: http://github.com/a1ronzo/SparkFun-9DOF-Razor-IMU-Test-Firmware 9DOF AHRS Code Base: http://code.google.com/p/sf9domahrs/source/list 9DOF AHRS Updated Code: http://code.google.com/p/itg-3200driver/ Datasheet: http://www.sparkfun.com/datasheets/Sensors/Gyro/PS-ITG-3200-00-01.4.pdf Datasheet: http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345.pdf Datasheet: http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf Python Graphic interface: http://www.youtube.com/watch?v=WuHRCnpcsDQ
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (22)
Qty
Description
SparkFun:FRAME-LETTER:

FRAME1, FRAME2

2
SparkFun:FRAME-LETTER:
SparkFun:LOGO-SFE:NEW

JP3

1
SparkFun:LOGO-SFE:NEW
SparkFun:CAP:0402-CAP

C13, C18, C21, C29, C1, C2, C3, C22, C24, C25, C27

11
SparkFun:CAP:0402-CAP
SparkFun:GND:

GND16, GND17, GND20, GND15, GND34, GND11, GND1, GND2, GND25, GND26, GND28, GND22, GND23, GND24, GND27, GND30, GND32, GND29, GND31, GND3, GND10

21
SparkFun:GND:

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components