Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader (select 'LilyPad' within the Arduino software). We added a handful of features to become a fully certified Arduino board. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Diecimila. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board. We really wanted to minimize the cost of an Arduino. The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. Can't decide which Arduino is right for you? ! Project description, more information and ordering can be found at https://www.sparkfun.com/products/8824 Arduino Pro Mini Homepage: http://www.arduino.cc/en/Main/ArduinoBoardProMini Getting Started Tutorial: http://www.arduino.cc/en/Guide/ArduinoProMini
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (17)
Qty
Description
SparkFun:CAP:0402

C10, C3, C1, C2

4
SparkFun:CAP:0402
SparkFun:FRAME-LETTER:

FRAME1

1
SparkFun:FRAME-LETTER:
SparkFun:CAP_POL:1206

C13, C19

2
SparkFun:CAP_POL:1206
SparkFun:GND:

GND25, GND26, GND28, GND3, GND1, GND7, GND8, GND30, GND32, GND4, GND5

11
SparkFun:GND:

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components