Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one.  The board comes with a JST connector for a single cell LiPo battery, a micro-USB connector for the 5V charge input, and selectable 3.3V and 5V ouput pins (labeled 'out'). There are also two charge pins broken out (labeled 'charge'), so you can use another 5V power source to charge the batteries, if you don't have a micro-USB cable. Project description, more information and ordering can be found at https://www.sparkfun.com/products/11231 Tutorial: http://www.sparkfun.com/tutorials/379 Datasheet: http://www.sparkfun.com/datasheets/Prototyping/Batteries/MCP73831T.pdf Datasheet: http://www.sparkfun.com/datasheets/Prototyping/tps61200.pdf
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (24)
Qty
Description
SparkFun:STAND-OFF:

JP8, JP5, JP7, JP6

4
SparkFun:STAND-OFF:
SparkFun:GND:

GND3, GND5, GND2, GND4, GND6

5
SparkFun:GND:
supply1:GND:

GND20, GND14, GND17, GND18, GND1, GND10

6
supply1:GND:
SparkFun:CAP:0402-CAP

C9, C4, C10, C2

4
SparkFun:CAP:0402-CAP

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components