The project owner hasn't added main project image yet.
We know what you're thinking: "That is awesome... what is it?" This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig we use to develop and test shields here at SparkFun! The pogo pins allow you to connect an Arduino shield to the dev board without having to make any solder connections: simply connect the Pogobed Shield to your Arduino, place the test shield on the pins and twist the tabs to lock in the flavor.
Project description, more information and ordering can be found at https://www.sparkfun.com/products/11188
Pointed Tip Pogo Pins: https://www.sparkfun.com/products/9174
Round Nylon Standoffs: https://www.sparkfun.com/products/10461
Metal Hex Standoffs: https://www.sparkfun.com/products/10463
1/4" 4-40 Screws: https://www.sparkfun.com/products/10453
3/4" 4-40 Screws: https://www.sparkfun.com/products/10451
10k Resistor: https://www.sparkfun.com/products/8374
40-pin Male Breakaway Header: https://www.sparkfun.com/products/116
Green LED: https://www.sparkfun.com/products/9592
Momentary Push Button: https://www.sparkfun.com/products/97
Kit Card: http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/SFE03-0010-KitCard-PogoBed-Spreads.pdf
How We Use Pogobeds: https://www.sparkfun.com/tutorials/138