Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
TinyCircuits Tiny Peripheral Switch 3mm ASL1101 Rev1 These are the design files for the TinyCircuits ASL1101 Rev 1 PCB. This is a Tiny peripheral board that has an 3mm sealed switch, along with pads to solder to. Format is in Cadsoft Eagle format - Eagle version 6.2 was used for the original design. For more infomation on this, check out the product page at Tiny-Circuits.com: http://tiny-circuits.com/products/asl1101 License: Design by TinyCircuits. All design files are released under the Creative Commons Attribution Share-Alike 3.0 License, see the following link for details: http://creativecommons.org/licenses/by-sa/3.0 All text above must be included in any redistribution or derived design This project uses designs and concepts developed as part of the Arduino project and the LilyPad project. The TinyCircuits design files themselves (schematics, PCB and libraries) are not directly derived from these works' design files and have been created new, however the concepts and basic architecture behind the TinyDuino and TinyLily products are derived and we thank the hard work of the organizations below for their contributions to open-source hardware: Original Arduino Uno Design by Team Arduino LilyPad Arduino Design by Leah Buechley and Sparkfun Electronics Please support the open-source hardware community
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (4)
Qty
Description
tinycircuits:FRAME_TINYCIRCUITS_B_L:

FRAME1

1
tinycircuits:FRAME_TINYCIRCUITS_B_L:
tinycircuits:SEWTAB:TH_1206

U$1, U$7

2
tinycircuits:SEWTAB:TH_1206
tinycircuits:AS-ITM-00041:

SW1

1
tinycircuits:AS-ITM-00041:
tinycircuits:DOCFIELD-TINYCIRCUITS-PCB

1
tinycircuits:DOCFIELD-TINYCIRCUITS-PCB

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components