Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
A (very) simple design which can (with the correct firmware; I might upload some) measure the capacity of a lithium ion / polymer battery (or any other battery, with a different load). Could also be used to discharge a Li-Ion / Li-Poly to the correct storage voltage (~3.8V). This is intended to be used with an Arduino Pro Mini (or clone).
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components