Project Description
Main Project Image
The project owner hasn't added main project image yet.
Project description
Designed for quick assembly and easy configuration of different gains.
No physical PCB layout, implemented on perfboard.
Teensy++ 2.0 required, with the optional +3V3 voltage regulator attached. The +5V bus needs to be connected via a wire from the Teensy board to the perfboard.
Gallery
The project owner hasn't added any images yet.
Design Files
Embed Code
Component (12)
Qty
Description
![](https://upverter.com/static/renders/components/000/0000000000000005_48x48.png)
Capacitor
C11, C9, C2, C12, C8, C10, C13, C5, C6, C7, C4
11
Generic Capacitor (2u2)
![](https://upverter.com/static/renders/components/c3d/c3d8cdaf29d19546_48x48.png)
2 pin jumper headers
J9, J11, J5, J8, J15, J6, J16, J13, J1, J2, J3, J12, J10, J14, J4, J17, J7
17
Through hole male pins + female 2 pin jumper = current test point
![](https://upverter.com/static/renders/components/f4c/f4c5a6fc4252ed3a_48x48.png)
1714955
X batt 3, X to device, U6, X batt 2, X shunt, X batt 1, X load 1
7
2 Connector Terminal Block
![](https://upverter.com/static/renders/components/486/4861570e5a983e8c_48x48.png)
101-00313-68-02
U33
1
SD Card Connector for Electric Imp