Candy Cane

Haroldo Calvo
859
1
0
0
Candy cane shaped led board
Open in Editor
Known forks (0)
We didn't find the known forks. Make the first fork
Tags
The project owner hasn't added any tags yet.

No License

Published: December 21, 2018 Complete

Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
This small candy cane shaped board contains a 16 led array and a push button, all controlled by TI's low power MSP430G2221IPW14 16bit 14 pin micro-controller. The board is powered by a small CR1025 coin cell and it may be re-programmed using a small 1.27mm pitch connector that fits the Launchpad value line dev board. To get that real Christmas look it should be fabricated with white soldermask and red silkscreen!
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (10)
Qty
Description
BK-870

BT1

1
CR1025 Coin Cell Retainer
RC0603FR-07422RL

R4, R2, R3

3
RES Thick Film SMD 422Ω 1% 1/10W 0603 100ppm/°C
LTST-C193KRKT-5A

D12, D5, D7, D6, D2, D13, D15, D9, D11, D1, D14, D4, D10, D3, D8, D16

16
LED RED CLEAR 0603 SMD
CRCW060347K0FKEA

R6, R5

2
RES Thick Film SMD 47kΩ 1% 1/10W 0603 100ppm/K

Show More

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components

Show More