Project Description
Main Project Image
The project owner hasn't added main project image yet.
Project description
Changes between v1 and v2;
- Fixed power supply grounding on Ch.2
- Fixed grouding plane of Analogue signal , grounded AGND of MCP3208 to this plane.
- Included a grounding plane for power supply.
- Increased the width of the V- trace on the power supply.
- Connected Ch.6 of MCP3208 to DGND for stable readings.
- Eliminated any right angles than existed within the traces.
- Included a 100nF capcitor between the power supply and DGND of MCP3208.
- Removed the via from the analogure grounding plane to the Adc ground.
- Included 24V barrel conncetor on board.
Gallery
The project owner hasn't added any images yet.
Design Files
Embed Code
Component (9)
Qty
Description
![](https://upverter.com/static/renders/components/b39/b393a6e7b28442bb_48x48.png)
RNF18FTD549R
ch2Rc, ch3Rc, ch0Ra, ch5Ra, ch1Rc, ch4Ra, ch5Rb, ch1Ra, ch5Rc, ch0Rb, ch4Rb, ch1Rb, ch4Rc, ch2Rb, ch0Rc, ch3Ra, ch3Rb, ch2Ra
18
No description
![](https://upverter.com/static/renders/components/055/055c64e9093959b6_48x48.png)
PJ-002BH
PJ-002BH102
1
2.5 mm Center Pin, 5.0 A, Right Angle, Through Hole, Dc Power Jack Connector
![](https://upverter.com/static/renders/components/31d/31ddc75d87dc4d53_48x48.png)
circuitco-logos:CIRCUITCO-LOGO
1
circuitco-logos:CIRCUITCO-LOGO
![](https://upverter.com/static/renders/components/186/1862ad31b3bb9606_48x48.png)
DIP-IC-SOCKET(2X8P-2.54)
U36
1