Project Description
Main Project Image
The project owner hasn't added main project image yet.
Project description
A (very) simple design which can (with the correct firmware; I might upload some) measure the capacity of a lithium ion / polymer battery (or any other battery, with a different load). Could also be used to discharge a Li-Ion / Li-Poly to the correct storage voltage (~3.8V). This is intended to be used with an Arduino Pro Mini (or clone).
Gallery
The project owner hasn't added any images yet.
Design Files
Embed Code
Component (5)
Qty
Description
![](https://upverter.com/static/renders/components/000/0000000000000003_48x48.png)
Resistor
R2
1
Generic Resistor (5k)
![](https://upverter.com/static/renders/components/310/310613a650be37b5_48x48.png)
Battery
B1
1
Generic Battery
![](https://upverter.com/static/renders/components/522/522eb519894aacac_48x48.png)
Resistor
Rload
1
Generic Resistor (4r)
![](https://upverter.com/static/renders/components/333/3338472f34d363ca_48x48.png)
ATmega328P-PU
U1
1
ATmega328 Microcontroller