Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
This a prototype board for a Casio SK1 midi adapter. I chose the ATMEL atmega 328 because it has enough pins and I am familiar with it. I may have a go at creating an SMD version in the future, so it can be done on a tiny board that will fit in the SK1 without removing the speaker. The diode array is there so I can trigger an interrupt on state change of any of the sense pins. Obviously if the state changes have no delay between them, this strategy will fail. It is probably unnecessary. At the moment, I am including it as an experiment.
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (16)
Qty
Description
Resistor

R2, R4, R3

3
Generic Resistor (10k)
1N4148

D4, D2, D6, D8, D3, D7, D9, D5

8
1N4148 Diode
Resistor

R7

1
Generic Resistor (270Ω)
C315C220J2G5TA

C1, C2

2
22 pF Capacitor

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components