Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery. Project description, more information and ordering can be found at https://www.sparkfun.com/products/10217 Datasheet: http://www.sparkfun.com/datasheets/Prototyping/Batteries/MCP73831T.pdf
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (13)
Qty
Description
SparkFun:FRAME-LETTER:

FRAME1

1
SparkFun:FRAME-LETTER:
SparkFun:GND:

GND1, GND15, GND14, GND17, GND18, GND19, GND2

7
SparkFun:GND:
SparkFun:LED:0603

D11

1
SparkFun:LED:0603
SparkFun:RESISTOR:0402-RES

R3, R4

2
SparkFun:RESISTOR:0402-RES

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components