Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
The Logomatic v2 takes everything we learned with multiple logging projects over the years and boils it down to an easy to use device, that is now more adaptable than ever! Version 2 incorporates the LPC2148 with USB, battery charging, and microSD support. This allows us to use the for even easier and faster modification of the firmware. No programmer required! The Logomatic v2 uses a USB mass storage stack to appear under any operating system as a flash drive. Logs are created in FAT16 format on the micro-SD media and can be downloaded quickly over a USB connection by dragging and dropping the text files from the device. The microSD card can also be removed and inserted into a card reader to download the logs. Board comes with a JST connector to be powered from our line-up of LiPo batteries or other power sources up to 7.5VDC. If you choose to use LiPo batteries, the Logomatic v2 has a built-in charger to charge batteries off USB. The Logomatic v2 ships with basic serial text and analog logging. Users can easily start with this firmware but are encouraged to modify the firmware for their specific requirements. It's a truly flexible logger. As one of our most popular products, the Logomatic has a ton of uses, and makes for a wonderful gift! For other great gift ideas, check out our . Project description, more information and ordering can be found at https://www.sparkfun.com/products/8627 Datasheet: http://www.sparkfun.com/datasheets/Widgets/SFE-0016-DS-Logomatic-v21.pdf Main firmware on github: http://github.com/SFE-Chris/Logomatic-V2 Alternative event logging firmware: http://www.sparkfun.com/tutorial/BubbleCounter/BubbleLogger.zip Bootloader tutorial: http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=94
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (33)
Qty
Description
SparkFun:LPC213X:

U4

1
SparkFun:LPC213X:
SparkFun:GND:

GND3, GND14, GND15, GND1, GND2, GND4, GND5, GND6, GND7, GND11, GND17, GND9, GND16, GND20, GND24, GND25

16
SparkFun:GND:
SparkFun:VCC:

P+5, P+4, P+7, P+8, P+2, P+3, P+15

7
SparkFun:VCC:
SparkFun_Master:LED:0603

LED3

1
SparkFun_Master:LED:0603

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components