Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
The USB Bit Whacker is a spectacular little development board featuring the PIC18F2553. Based on the work of Brian Schmalz, the UBW is a small board with a command interpreter for basic input and output control. When attached to a Windows/Max OS X/Linux computer, the UBW will show up as an RS232 Com port! You control the individual I/O pins on the PIC through simple serial commands. Board comes fully tested, preprogrammed, and assembled as shown. Project description, more information and ordering can be found at https://www.sparkfun.com/products/762 Hex: http://www.sparkfun.com/datasheets/DevTools/PIC/UBW_Boot24MHz_combo.zip UBW Project Home Page: http://www.schmalzhaus.com/UBW/index.html Microchip USB Framework v1.3 (includes bootloader): http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2124¶m=en532204&page=wwwFullSpeedUSB Quickstart guide: http://www.sparkfun.com/datasheets/DevTools/PIC/PIC18F2553%20UBW%20Quickstart%20Guide.pdf
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (16)
Qty
Description
SparkFun:GND:

GND1, GND9, GND4, GND6, GND8, GND7, GND10, GND5, GND2, GND11, GND3

11
SparkFun:GND:
SparkFun:CAP:0402-CAP

C4, C2, C5, C1

4
SparkFun:CAP:0402-CAP
SparkFun:LED:1206

LED1, LED2, LED3

3
SparkFun:LED:1206
SparkFun:RESISTOR:0402-RES

R1, R3, R4, R2, R5

5
SparkFun:RESISTOR:0402-RES

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components