OpAmp Breakout

sparkfun
117
0
0
0
OpAmp Breakout is imported for Sparkfun. The source can be found at https://www.sparkfun.com/products/9816
Open in Editor
Known forks (0)
We didn't find the known forks. Make the first fork
Tags
The project owner hasn't added any tags yet.

No License

Published: July 3, 2013 Concept

Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer. Project description, more information and ordering can be found at https://www.sparkfun.com/products/9816 LMV358 datasheet: http://focus.ti.com/lit/ds/symlink/lmv324.pdf
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (10)
Qty
Description
SparkFun:FRAME-LETTER:

FRAME1

1
SparkFun:FRAME-LETTER:
SparkFun:FIDUCIAL-1X2

2
SparkFun:FIDUCIAL-1X2
SparkFun:CAP:0402

C6, C5, C3, C1, C2

5
SparkFun:CAP:0402
SparkFun:GND:

GND2, GND6, GND3, GND1

4
SparkFun:GND:

Show More

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components

Show More