The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old . Soldering is required, but it's relatively easy and requires minimal tools. We even have a ! The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1. This product is the entire kit and contains the following items: Project description, more information and ordering can be found at https://www.sparkfun.com/products/9760 Joystick Shield PCB: http://www.sparkfun.com/commerce/product_info.php?products_id=9490 Momentary Push Button Switch - 12mm Square: http://www.sparkfun.com/commerce/product_info.php?products_id=9190 Thumb Joystick: http://www.sparkfun.com/commerce/product_info.php?products_id=9032 Mini Push Button Switch: http://www.sparkfun.com/commerce/product_info.php?products_id=97 6-pin Arduino Stackable Header: http://www.sparkfun.com/commerce/product_info.php?products_id=9280 8-pin Arduino Stackable Header: http://www.sparkfun.com/commerce/product_info.php?products_id=9279 Joystick Assembly Tutorial: http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=161 Joystick Quickstart Guide: http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=171 Arduino Sample Sketch: http://www.sparkfun.com/Code/Joystick_Shield_Example.zip