Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
This is a breakout board for the ST's single-axis LY530ALH gyro.  The LY530ALH measures angular velocity along the axis with a full scale of ±300°/s. Two different analog outputs are provided for the z-axis - one 1x amplified and the other 4x amplified. A regulated voltage between 2.7 and 3.6VDC should be supplied to the power pins. We have the filtering circuits all set up, so you'll just need to connect the outputs to an ADC, and you're ready to go. This breakout board includes the gyro and all necessary filtering capacitors as shown. The 1x and 4x amplified outputs of both axes are connected to the 0.1" pitch headers, along with the power-down, self-test, high-pass filter reset, and power pins. We put the LY530ALH on our LPY5xxx gyro breakout boards. Don't be tricked by the pin-out, the x-axis outputs will not work. Project description, more information and ordering can be found at https://www.sparkfun.com/products/10100 LY530ALH Datasheet: http://www.sparkfun.com/datasheets/Sensors/IMU/LY530ALH.pdf
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (9)
Qty
Description
SparkFun:FRAME-LETTER:

FRAME1

1
SparkFun:FRAME-LETTER:
SparkFun:CAP:0402-CAP

C3, C5, C6, C7, C8

5
SparkFun:CAP:0402-CAP
SparkFun:CAP_POL:1206

C4

1
SparkFun:CAP_POL:1206
SparkFun:3.3V:

P+1, P+3, P+4, P+9

4
SparkFun:3.3V:

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components