Bus Pirate

sparkfun
330
0
0
0
Bus Pirate is imported for Sparkfun. The source can be found at https://www.sparkfun.com/products/9544
Open in Editor
Known forks (0)
We didn't find the known forks. Make the first fork
Tags
The project owner hasn't added any tags yet.

No License

Published: July 3, 2013 Concept

Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
The Bus Pirate, created by and featured on Hack a Day, is a troubleshooting tool that communicates between a PC and any embedded device over most standard serial protocols, which include I2C, SPI, and asynchronous serial- all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips. Working with the Bus Pirate is simple and effective - type commands into a terminal on your computer, those commands are interpreted by the Bus Pirate and sent via the proper protocol. The Pirate will also interpret data sent from your embedded device back to your computer terminal. A big bonus is the bootloader installed on the PIC, which allows you to easily update the firmware and change the functionality of the board. The main components of the Bus Pirate are PIC24FJ64 processor and an FT232RL USB-to-Serial chip. A Mini-B USB connector is populated on the board, and when you plug it into your computer it will come up as a virtual COM port. The pinout of the 2x5 I/O header is documented . Order now! We are setup to build these in house regularly. Lead times should remain less than a week. Project description, more information and ordering can be found at https://www.sparkfun.com/products/9544 Bus Pirate Manual: http://dangerousprototypes.com/docs/Bus_Pirate Datasheet: https://dlnmh9ip6v2uc.cloudfront.net/datasheets/Components/General%20IC/32103_SPCN.pdf Bus Pirate Forum: http://dangerousprototypes.com/forum/viewforum.php?f=4 FTDI USB Drivers: http://www.ftdichip.com/FTDrivers.htm
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (19)
Qty
Description
supply2:GND:

V27, V34, V33, V7, V25, V4, V8, V30, V3, V39, V15, V5, V10, V37, V23, V28, V35, V6, V9, V18, V21, V29, V12, V31, V26, V17, V32, V40, V1, V11

30
supply2:GND:
supply2:V+:

SUPPLY13, SUPPLY5, SUPPLY6, SUPPLY20, SUPPLY14, SUPPLY8, SUPPLY4, SUPPLY12, SUPPLY7, SUPPLY1

10
supply2:V+:
SparkFun:RESISTOR:0402-RES

R16, R7, R11, R8, R2, R12, R20, R5, R6, R15, R1, R4, R10, R14, R18, R3, R13, R17, R9

19
SparkFun:RESISTOR:0402-RES
SparkFun:LED:0603

LED2, LED4, LED6, LED1, LED9

5
SparkFun:LED:0603

Show More

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components

Show More