E-paper displays are rad. But those 26-pin SMD connectors can be a real pain to solder, so we put together a breakout board to help you integrate this very cool technology into your next project. This board breaks out all of the major pins from the e-paper ribbon connector to a 0.1" pitch header. Because the e-paper display requires a 35V supply, the breakout also includes a voltage step-up so that you can power the display using either 3.3V or 5V. Project description, more information and ordering can be found at https://www.sparkfun.com/products/10304 Datasheet: http://www.sparkfun.com/datasheets/LCD/Monochrome/WATN001002BFW00000000.pdf Datasheet: http://www.sparkfun.com/datasheets/Prototyping/Connectors/08630.pdf Example Code: http://dlnmh9ip6v2uc.cloudfront.net/datasheets/LCD/Monochrome/ePaperDriver.zip bildr Tutorial: http://bildr.org/2011/06/epaper-arduino/