Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the folks at and , the ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is brought to the top level. A is available! This comes in kit form and must be soldered together by the end user. Please note - we do not ship assembly instructions, but you can find a big, clean photographed assembly guide ! There are a few tutorials on assembly listed below. All soldering is through-hole (relatively easy) but always check your component orientation before soldering! The kit is pictured with the bread-board option. We highly recommend this breadboard! See the related items below for all the colorful options of breadboards you have. Project description, more information and ordering can be found at https://www.sparkfun.com/products/7914 Stackable Headers 6-pin: http://www.sparkfun.com/commerce/product_info.php?products_id=9280 Stackable Headers 8-pin: http://www.sparkfun.com/commerce/product_info.php?products_id=9279 5mm Basic Yellow LEDs: https://www.sparkfun.com/products/9594 330 Ohm resistors: http://www.sparkfun.com/commerce/product_info.php?products_id=8377 10k resistor: http://www.sparkfun.com/commerce/product_info.php?products_id=8374 Momentary push buttons: http://www.sparkfun.com/commerce/product_info.php?products_id=97 0.1uF Ceramic Capacitors: http://www.sparkfun.com/commerce/product_info.php?products_id=8375 ProtoShield Quickstart Guide: http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=191 Assembly Instructions: http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=181 Arduino Home Page: http://arduino.cc Assembly Tutorial: http://www.atomicsalad.com/archive/2010/02/02/tutorial_sparkfun_protoshield_for_arduino_assembly_updated.php ProtoShield Wishlist: https://www.sparkfun.com/wish_lists/53898
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (15)
Qty
Description
pinhead:PINHD-2X3:

ICSP

1
pinhead:PINHD-2X3:
SparkFun:RESISTOR:PTH1

R1, R2, R4

3
SparkFun:RESISTOR:PTH1
SparkFun:LED:5MM

LED1, LED2

2
SparkFun:LED:5MM
supply1:GND:

GND2, GND3, GND1, GND4, GND5, GND6, GND7

7
supply1:GND:

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components