USB 32-Bit Whacker - PIC32MX795 Development Board

sparkfun
196
0
0
0
USB 32-Bit Whacker - PIC32MX795 Development Board is imported for Sparkfun. The source can be found at https://www.sparkfun.com/products/9713
Open in Editor
Known forks (0)
We didn't find the known forks. Make the first fork
Tags
The project owner hasn't added any tags yet.

No License

Published: July 3, 2013 Concept

Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and running. Power can be provided over USB or from an external source. It has 3 push buttons (Reset, and 2 user-defined buttons) and 5 LEDs (Power, USB, and 3 user defined LEDs). All of the 78(!) of the PIC32's I/O pins are broken out. The board comes pre-loaded with a USB bootloader and special UBW firmware that accepts simple serial commands to control the various I/O functions. If you have used a or before and are frustrated by the lack of CPU power, lack of memory, lack of I/O pins, or lack of sophisticated software, the UBW32 is just what you are looking for! While only slightly more expensive than the 8-bit UBW, the UBW32 has significantly more I/O and CPU horsepower. The UBW32 is also a very good stand-alone development platform for the USBPIC32 chip. It contains a simple to use USB bootloader so that you can write your own code and download it to the board without any additional programmer, tools, or software. If you need low-level debugging, you can also attach an ICD2/ICD3 or other PIC debugger. The PIC32 chip is capable of doing USB OTG, USB Mass Store, USB Virtual Com Port and USB Host roles. There is a footprint on the bottom of the board for a USB connector that will allow you to plug any USB device into the UBW32. There is a jumper that allows you to power the VBUS 5V USB wire if you program your UBW32 to be a USB Host. Project description, more information and ordering can be found at https://www.sparkfun.com/products/9713 Board: http://www.sparkfun.com/datasheets/DevTools/PIC/UBW32_MX795_v26_brd.pdf Datasheet: http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/PIC/Microchip - PIC32MX5XXetc.pdf Documentation for v1.4 Firmware: http://schmalzhaus.com/UBW32/doc/UBW32Documentation_v1_4.html UBW32 Website: http://www.schmalzhaus.com/UBW32/ Windows: http://www.sparkfun.com/datasheets/DevTools/PIC/UBW32inf.zip
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (29)
Qty
Description
SparkFun02-20-08:3.3V:

P+15, P+13, P+9, P+10, P+17, P+2, P+8, P+7, P+18, P+11, P+4, P+3, P+5, P+6, P+14, P+12, P+16

17
SparkFun02-20-08:3.3V:
SparkFun-12-01-09:M02:PTH

J1, JP1

2
SparkFun-12-01-09:M02:PTH
SchmalzHaus:M40:

J4, J3

2
SchmalzHaus:M40:
SparkFun02-20-08:TAC_SWITCH:SND

PROGRAM, RESET, USER

3
SparkFun02-20-08:TAC_SWITCH:SND

Show More

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components

Show More