Color LCD - Breakout Board
Project Description
Main Project Image
The project owner hasn't added main project image yet.
Project description
Created for the , this breakout board for the popular Nokia 6100 Knock-off color LCD has an improved backlight driver circuit (boosts to 7V) , plus we give you a tri-color status LED and 2 pushbuttons, all accessed through one 12-pin 0.1" spaced header. Vbat and the 3.3V input can be driven from the same regulated 3.3V source, but the device will draw more current than if the Vbat input was driven from a higher source voltage. For an estimate of the current draw for a given input voltage, refer to the chart on the schematic file below.
Project description, more information and ordering can be found at https://www.sparkfun.com/products/11062
mbed Example: http://mbed.org/cookbook/Nokia-LCD
Application Note: http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/ColorLCDAppNote.pdf
Arduino Library: https://github.com/sparkfun/ColorLCDShield/tree/master/firmware/Arduino/libraries/ColorLCDShield
Gallery
The project owner hasn't added any images yet.
Design Files
Embed Code
Component (20)
Qty
Description
SparkFun:GND:
GND4, GND6, GND1, GND3, GND8, GND7, GND2, GND5
8
SparkFun:GND:
SparkFun:RESISTOR:0402-RES
R7, R1, R2, R5, R6, R4, R3
7
SparkFun:RESISTOR:0402-RES
SparkFun:DIODE:SMA
D1
1
SparkFun:DIODE:SMA
SparkFun:LOGO-SFE:NEW
U$8
1
SparkFun:LOGO-SFE:NEW
