Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
The XBee Shield simplifies the task of interfacing an XBee with your Arduino. This board mates directly with an or , and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. This is SparkFun's own design and is a distant relative to the official XBee Shield from Arduino. The serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN pin of the XBee. The board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The Arduino's reset button is brought out on the shield, and a 12x11 grid of 0.1" holes are available for prototyping. The shield does not come with headers installed; we recommend the and . The XBee module is also not included. Project description, more information and ordering can be found at https://www.sparkfun.com/products/9841
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (20)
Qty
Description
SparkFun:RESISTOR:0402-RES

R11, R1, R3, R4, R2

5
SparkFun:RESISTOR:0402-RES
SparkFun:LED:0603

LED1, LED2, LED3, LED4, LED5

5
SparkFun:LED:0603
SparkFun:GND:

GND28, GND2, GND4, GND1, GND3, GND5, GND6, GND7, GND8, GND9

10
SparkFun:GND:
SparkFun:LOGO-SFE:SK

U$1

1
SparkFun:LOGO-SFE:SK

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components