Project Description
Main Project Image
The project owner hasn't added main project image yet.
Project description
This board allows you to interface with your car's OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a footprint which mates directly to our FTDI Basic or a Bluetooth Mate. The DB9 connector mates with our DB9 to OBD-II cable listed below.
Project description, more information and ordering can be found at https://www.sparkfun.com/products/9555
Quickstart Guide: http://www.sparkfun.com/tutorials/294
Datasheet: http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Widgets/stn1110-ds.pdf
Datasheet: http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2551.pdf
ELM327 Command Set: http://www.sparkfun.com/datasheets/Widgets/ELM327_AT_Commands.pdf
Compatible Software List: http://scantool.imechatronics.com/downloads.htm
Gallery
The project owner hasn't added any images yet.
Design Files
Embed Code
Component (38)
Qty
Description
SparkFun:CAP_POL:1206
C4, C9, C18
3
SparkFun:CAP_POL:1206
SparkFun:CAP:0402-CAP
C2, C3, C1, C5, C7, C6, C8, C10, C15, C16, C11, C12, C13, C14, C17
15
SparkFun:CAP:0402-CAP
_stn_ports:PORT_IN-17:
PORT16, PORT9, PORT11, PORT15, PORT20, PORT42, PORT36, PORT40, PORT47
9
_stn_ports:PORT_IN-17:
_stn_ports:PORT_OUT-16:
PORT17, PORT7, PORT8, PORT14, PORT5, PORT44, PORT37, PORT35, PORT50, PORT45
10
_stn_ports:PORT_OUT-16:
