TinyCircuits Tiny Peripherals TI Motor Board 2mm ASL2001 Rev1 These are the design files for the TinyCircuits ASL2001 Rev 1 PCB. This is a Tiny Peripheral TI Motor Board using the TI DRV8837, along with pads to solder to for all the signals. Format is in Cadsoft Eagle format - Eagle version 6.2 was used for the original design. For more infomation on this, check out the product page at Tiny-Circuits.com: http://tiny-circuits.com/products/asl2001 License: Design by TinyCircuits. All design files are released under the Creative Commons Attribution Share-Alike 3.0 License, see the following link for details: http://creativecommons.org/licenses/by-sa/3.0 All text above must be included in any redistribution or derived design This project uses designs and concepts developed as part of the Arduino project and the LilyPad project. The TinyCircuits design files themselves (schematics, PCB and libraries) are not directly derived from these works' design files and have been created new, however the concepts and basic architecture behind the TinyDuino and TinyLily products are derived and we thank the hard work of the organizations below for their contributions to open-source hardware: Original Arduino Uno Design by Team Arduino LilyPad Arduino Design by Leah Buechley and Sparkfun Electronics Please support the open-source hardware community