Breadboard adaptor for 6.35mm audio jack by Trebuchetindustries

Trebuchetindustries

Breakout board for a 6.35mm audio connector so I can more easily get audio signals into my breadboard

Project Description

Main Project Image

The project owner hasn't added main project image yet.

Project description

See https://github.com/PhilboBaggins/assorted-pcbs/tree/master/Breadboard%20adapter%20for%206.35mm%20audio%20jack

Gallery

The project owner hasn't added any images yet.

Design Files

Embed Code

<iframe width='800' height='600' frameborder='0' scrolling='no' src='http://upverter.com/eda/embed/#designId=3db4c9d9acf5b70b'></iframe>

Component (2)

Qty

Description

3 Pin Header

J2, J3

3 pin Header, 0.1" / 2.54mm Pitch, Through-hole, Generic

112AX

1/4 inch Mono Phone Jack, Tip Closed Ciruit

Export Design Data

Open JSON Format

All model data in Upverter's Open JSON export format (more info)

Gerber Format (RS-274X extended)

CAD to CAM transfer instructions (more info)

NC Drill (Excellon)

NC drill and route machine instructions (more info)

XYRS

X-Y, rotation and side data for Pick and Place assembly (CSV)

PADS Layout Netlist

Export your schematic into a third-party layout tool

Dimension Drawing

Export the board outline, holes, and rulers

High-Res Schematic PNG

High resolution image form

3D Model (Step)

3D model of the board and components

Breadboard adaptor for 6.35mm audio jack

Contributors

Known forks (1)